Products » Extenders » HDBaseT » ET70-AC1
ET70-AC1
230 feet (70 meters) HDMI Extender
Description
Features
Specification
ET70-AC1 is a HDMI extender for transferring HDMI, audio, and Bi-directional RS‑232 and IR signals up to 230 feet (70 meters) over a single CatX cable without any special setup or configuration. It supports uncompressed Full HD 1080p, Ultra HD, 2K, and 4K video signals, also supports3D, Deep Color, and HDCP 2.2. Audio capabilities support high-bitrate 7.1 audio formats like Dolby® TrueHD and DTS-HD Master AudioTM as well as uncompressed linear PCM. All signals are transferred over a single CAT type cable, and the distance is up to 230 feet (70 meters) at 1080P/130 feet (40 meters) at 4K.
 
ET70-AC1 HDCP-compliant enables the transmission of HDMI signals reliable, supports Deep Color up to 12‑bit, CEC pass-through and HD lossless audio formats. In addition, DDC communication of EDID and HDCP  are continuously maintained between source and display,  which can ensure direct compatibility and optimal signal transmission between devices.
 
ET70-AC1 provides an economical and effective way for extending HDMI signal with embedded multi-channel audio from HDMI-equipped devices. The compact enclosure size and single-sided connectors for ports of HDMI, Control and Power make the ET70-AC1 ideal for discreet places, such as in house, classroom, auditorium, corporate boardroom, and wherever needed to meet application requirements.
Key Features

●  Provides high performance transmission of audio and video through Cat5e/6/6a/7 cables (24 AWG) for a distance up to 230 feet (70 meters) at 1080P and 130 feet (40 meters) at 4K
●  Supports HDMI2.0, and resolutions up to 4K@60Hz YUV4:2:0,HDCP 2.2 compliant
●  Meets HDMI specification features including data rates up to 10.2 Gbps, Deep Color up to 12-bit, 3D, HD lossless audio formats, and CEC pass-through
●  HDBaseT 2.0 compliant
●  Bi-directional PoC(Power over Cable), only one power supply is needed at either side
●  Automatic EDID management, 2-way IR and RS232 pass-through over HDBaseT
●  Single-sided connections for easy installation
●  Compact design for less shipping costs
Specifications*

Technical
  ET70-AC1T(Transmitter) ET70-AC1R(Receiver)
Maximum Pixel Clock 297 MHz 297 MHz
Signal Type HDMI1.4a w/HDCP1.4;
HDMI2.0 w/HDCP2.2 (4K@60Hz YUV4:2:0)
HDMI1.4a w/HDCP1.4;
HDMI2.0 w/HDCP2.2 (4K@60Hz YUV4:2:0)
Inputs 1 x HDMI, Type A 19-pin female 1 x HDBaseT , RJ45 female
Outputs 1 x HDBaseT , RJ45 female 1 x HDMI, Type A 19-pin female
Resolutions Supported 4K@60(YUV4:2:0)/4K@30(YUV4:4:)1080p/1080i/720p/576p/480p/576i/480i
Input Video Level 0.5~1.0V  Vp-p
Video Impedance 100ohms
Transmission distance 230 feet (70 meters) at 1080P/130 feet (40 meters) at 4K
General
Operating Temperature 32~95°F (0~35°C), 10% to 90%, noncondensing
Storage Temperature -4~158 °F (-20~70°C), 10% to 90%, noncondensing
Humidity 10% to 90%, noncondensing
ESD Protection Human body model:
+/- 8KV (air-gap discharge)
+/- 4KV (contact discharge)
Vibration-proof 10 ~ 500Hz, 2G 10 minutes a cycle, X axis, Y axis and Z axis are 60 minutes respectively
Power Supply 12V DC 2A
Power Consumption (Max.) 11 Watts Max (pair)
Chassis Material Metal 
 
*Appearance, Features and specifications subject to change without notice.

Business

Technical Support
返回顶端